FUGESEN-1104 Tractor
Model: FUGESEN-1104
Drive Type: 4WD
Differential Lock: Locking Pin Type
Overall Dimensions L×W×H(mm): 4650*2150*3040
Wheel Base(mm): 2600
| FUGESEN-904 | Model | FUGESEN-1104 | |
| Drive Type | 4WD | ||
| Overall Dimensions L×W×H(mm) | 4650*2150*3040 | ||
| Wheel Track(mm) | Front | 1630-1960 | |
| Rear | 1520-2120 | ||
| Wheel Base(mm) | 2600 | ||
| Ground Clearance(mm) | Under Front Axle | 440 | |
| Rated Traction Force(N) | 26000 | ||
| Construction Mass(kg) | 4200 | ||
| Min. Turning Radius(m) | 5.3 | ||
| Theoretical Speed (km/h) | Forward | 1.60, 2.52, 3.04, 4.78, 3.81, 5.99, 7.22, 11.36, 8.82, 13.86, 16.7, 26.29 | |
| Reverse | 4.17, 6.56, 7.9, 12.44 | ||
| Engine Specifications | Type | 6-cylinder, Upright Inline Cylinder, Radiator Cooling, 4-storke Cycle, Direct-injection | |
| Rated Power(kW/hp) | 81.0/110.0 | ||
| Rated Fuel Consumption (g/kW/h) | ≤242 | ||
| Rated Speed(rpm) | 2300 | ||
| Bore × Stroke(mm) | 108×125 | ||
| Total Displacement(L) | 7.42 | ||
| Drive System | Clutch | Dry Independent type dual function clutch | |
| Gear Box | 4×(3+1) Slinding gear shift | ||
| Main Drive | One pair of spiral bevel gears | ||
| Differential | Obturation, four bevel gears | ||
| Differential Lock | Locking Pin Type | ||
| Final Transmissions | Planetary Reduction Gear | ||
| Traveling Mechanism | Tire | Front | 13.6-24 |
| Rear | 16.9-34 | ||
| Steering Gear | Hydraulic Steering | ||
| Brake | Oil Immersed Multi-plate Disc | ||
| Working Device | Hydraulic System | Lifting Capacity at 610 mm Behind Lift Point(kn) | 1590 |
| 3-Point Suspension | Category: Ⅱ | ||
| P.T.O. Shaft | Rotating Speed(rpm) | 540/1000 or 760/1000 | |
| Spline Size | 6-Ø35 Rectangular Spline | ||
